Sony HANDYCAM DCR-TRV380 Operation Manual page 83

You can connect a USB cable (supplied) to your cmncorder, and view the picture
on the tape or "Memory Stick" in your camcorder on your computer. For details.
refbr to "First Step Guide" in tile supplied CD-ROM.
t>STD-USB Select to view the picture on the Memory Stick."
PictBridge Select to connect the PictBridge compliant printer (p. 104).
USB STREAM
Select to view the picture on the tape.
t>OFF Select not to display date, time and tile camera settings data during
playback.
DATE/TIME
Select to display the date and time during playback (p. 57).
CAMERA DATA Select to display the camera settings data during playback (p. 57).
t>AUTO Select to display the remaining tape indicator for about 8 seconds:
• After you select the CAMERA-TAPE mode with the cassette
inserted, and your canlcorder calculates the
rctuaining amount
of
tape.
• When you touch _ plav/pause).
ON Select to always display the remaining tape indicator.
DON Select when using the Remote CommaMer supplied with your
camcorder.
OFF Select to deactiv tte the Remote Commander to prevent your
camcorder from responding to a commaM sent by another VCR
remote control Llnit.
0
Note
• The setting returns to [ON] _@en you ha_e the power source disconnected
from your
camcorder l\)r more than 5 minutes.
DON Select to turn on the camera recording lamp on the front of your
camcorder during recording.
I
CD
CD
=_ continued
Using the Menu
83