Sony HANDYCAM DCR-TRV380 Operation Manual page 68

Usingthe/ J
(MEMORY SET)menu
- QUALITY/IMAGE SIZE/ALL ERASE/NEW
FOLDER, etc,
You can select items listed below on the
MEMORY SET menu. To select items, see
"Selecting menu items' (p. 62).
The default settings are marked with 1>. The
indicators in parentheses appear when the
setting is selected. The settings you can adjust
vary depending on the power mode of your
camcorder. The screen shows the items you can
currently operate. Unavailable items will be
grayed out.
_60mln_ti FIRE i20_
[] QUALITY
t>FINE
(FINE)
Select to record still images with the fine image quality (compressed
to about 1/4).
STANDARD (STD) Select to record still images with the standard image quality
(compressed to about l/l/)).
[] FLD/FRAME
t>FIELD To record mo_ing subjects colTecting jitter (p. 33).
FRAME ( _ ) To record stationa U subjects in high quality.
_IMAGE SIZE
D320 x 240 Select to record moxies for playing on
a
large screen, or to record
([_320) clearer pictures.
160 x 11 2 ([_160) Select to record for longer time.
_REMAINING
t>AUTO Select to display the remaining capacity of the 'Memory Stick in the
following cases:
• After inselling a "MemoU Stick" with the POWER switch in the
CAMERA-MEMORY mode (for about 5 seconds).
• When the remaining capacity of the "Memory Stick" is less than 2
minutes after the CAMERA-MEMORY mode is selected.
• At the starting or ending point of the movie (for approximately 5
seconds).
68
Using the Menu