Advertisement
elnstallation
1, WARNING: Do not allow your Electone or its bench to rest
on or be installed over power cords of any type. An electrical
shock and/or fire hazard could possibly result from this type
of improper installation.
2. WARNING: Do not place objects on your Electone power
cord or place it in a position where anyone could trip over,
walk on or roll anything over it. An improper installation of
this type creates a personal injury/fire hazard possibility.
3. Main Power Supply Verification: Your Electone has been
manufactured specifically for the main supply voltages used
in your area. if you should move, or if any doubt exists, please
consult your local authorized Electone dealer for instructions.
The main supply voltage is printed on the name plate.
4, Environment: Your Electone should not be installed in a
position that exposes the cabinet to direct sunlight or air
currents having high humidity or heat levels. This type of
installation can cause contact oxidation, case joint separation,
and cabinet finish problems.
5. Electromagnetic Interference (RFI): Your Electone has
been type tested and found to comply with all applicable
regulations. However, if it is installed in the immediate
proximity of other electronic devices, some form of inter-
ference may occur.
CANADA
THIS APPARATUS COMPLIES WITH THE "CLASS B" LIMITS FOR RADIO
NOISE EMISSIONS SET OUT IN RADIO INTERFERENCE REGULATIONS.
* This applies only to products distributed bv Yamaha Canada Music Ltd.
Installation and Maintenance
e Maintenance
1. SERVICE: Your Electone contains no user serviceable com-
ponents. Refer all service to qualified service technicians only.
2. BENCH STRUCTURAL INTEGRITY: If any motion or an
"unsteady" sensation is noted in the bench, please check its
structural integrity immediately. Discontinue use until any
and all discrepancies are resolved.
3. CLEANING/CARE
A) GENERAL: DO NOT use chemically harsh (i.e., alcohol,
paint thinners, etc.) or abrasive cleaners on any portion of
your Electone.
B) KEYS/CONTROL
PANEL:
When cleaning the keys
and control panels of your Electone, please use a soft
absorbent-type cloth that has been dampened with a very
mild solution of liquid soap and lukewarm water.
C) CABINET/BENCH: Clean the cabinet portions of your
Electone with a slightly dampened cloth containing a
neutral
cleaning
agent. The cleaning agent selected
should not contain a high wax content or any other
substance that would have a tendency to form a "build-
up" on the cabinet.
4. Vinyl Products: Do not set vinyl items, (i.e., headphones
vinyl doilies, etc.) on the finished surfaces of your Electone or
use polyvinyl material to cover the unit for any extended
period of time. A chemical reaction many occur between the
finish chemical
and
those
contained
in the polyvinyl
products, resulting in a permanent marring of the finish.
IMPORTANT
NOTICE:
This product has been tested and
approved by independent safety testing laboratories in order that
you may be sure that when it is properly installed and used in
its normal and customary manner, all foreseeable risks have
been eliminated. DO NOT modify this unit or commission
others to do so unless specifically authorized by the manu-
facturer. Product performance and/or safety standards may be
diminished. Claims filed under the expressed warranty terms
may be denied if the unit is/has been modified. The warranty of
title (patent infringement, etc.) will not be defended by the
manufacturer
in the area(s) that relate to the modification.
Implied warranties may also be affected.
FCC Information (USA)
While the following statements are provided to comply with FCC Regulations
in the United States, the corrective measures listed are applicable worldwide.
The digital series of Yamaha Electones™ use frequencies that appear in the
radio frequency range, and if installed in the immediate proximity of some
types of audio or video devices within three meters (approximately ten feet),
interference may occur.
This series of Yamaha Electones™ has been typetested and found to comply
with the specifications set for a class B computer in accordance with those spe-
cifications listed in sub-part J, part 15 of the FCC rules. These rules are
designed
to provide
a reasonable
measure
of protection
against
such
interference. However, this does not guarantee that interference will not occur.
If your Electone™ should be suspected of causing interference with other
electronic devices, verification can be made by turning your Electone™ off
and on. If the interference continues when your Electone™ is off, the
Electone™ is not the source of the interference. If your Electone™ does
appear to be the source of the interference, you should try to correct the
situation by using one or more of the following measures:
© Relocate either the Electone™ or the electronic device that is being affected
by the interference.
© Utilize power outlets for the Electone™ and the device being affected that are
on different branch (circuit breaker or fuse) circuits, or install AC line filters.
* [n the case of radio-TV interference, relocate the antenna or if the antenna
lead-in is 300 ohm ribbon lead, change the lead-in to coaxial type cable.
If these corrective measures do not produce satisfactory results, please contact
an authorized Yamaha Electone™ dealer for suggestions and/or corrective
measures. If you can not locate an authorized Yamaha Electone™ dealer in
your general
area,
please contact
the Electone™
Service
Department,
YAMAHA CORPORATION OF AMERICA, U.S.A., 6600 Orangethorpe Ave.,
Buena Park, CA 90620.
If for any reason, you should need additional information relating to radio or TV
interference, you may find a booklet prepared by the Federal Communications
Commission Helpful: "How to Identify and Resolve Radio-TV Interference
Problems." This booklet, Stock #004-000-00345-4, is available from the US.
Government Printing Office, Washington DC. 20402.
Advertisement
