Advertisement
FM VOICE PACK (HE-8)
=> For details on the FM Voice Pack of HE-6, see page 27.
LST, a
COARSE
USER VOICE
Copy
2
3
Lect
d
Gently but firmly insert the optional FM Voice Pack
LOWER KEYBOARO
S ———
3 Choose the number of the Pack voice you
wish to copy.
the TEMPO display.
uu t:
TEMPONDATA)
=
ез
c
c
SO0O
[How to Sound a Copied FM Voice Pack
Voice]
Before a copied FM Voice Pack voice can be
sounded, it must be assigned to a grey voice
button at the Electone's panel. While pressing the
USER VOICE button to which the Pack voice was
copied, press a grey voice button, The grey
button's lamp will light up to indicate that the
Pack voice has been assigned to it. To sound the
assigned Pack voice, turn on that grey button, set
its volume level, then play the corresponding
keyboard.
[Transferring the FM Voice Pack Data to a
RAM Pack]
After you have copied voice data of an FM Voice
Pack to USER VOICE buttons at the Electone, you
can perform a TO PACK operation to transfer that
User voice data to a RAM Pack.
[Partial Copying of Voice Data from or to a
RAM Pack]
After you have transferred Registration Memory
data to a RAM Pack, you can later copy only the
User voice data back to the Electone.
With the RAM Pack inserted in the Electone,
press the COPY button @ while pressing the
FROM PACK button & . Only the User voice data
will be copied back to the Electone.
c
c
c
wm
CONFIRM
READY
ERROR
FROM PACK
want to copy it to the Electone.
5 While pressing the COPY button, press a
numeric button in the USER VOICE section
to copy the selected Pack voice.
If necessary, repeat Steps 2 through 5 to select and
copy other voices in the FM Voice Pack to other USER
VOICE buttons.
TEMPONDATA}
=
=< = =
CC
= = = = SES
ooo
o
And if you press the TO PACK button while
pressing the COPY button, only the User Voice
data can be copied to the RAM Pack.
[Receiving Voice Data via MIDI]
Besides copying the voice data of an FM Voice
Pack and assigning it to USER VOICE, it is also
possible to create voice data using an external
input device, such as a personal computer, and to
receive that data at the Electone. The voice data
received at the Electone will be directly assigned
to the USER VOICE buttons.
[Additional Information]
When you are choosing a voice number, if 128
appears on the TEMPO display and you press
either the A button or the coarse and A buttons,
an alarm will sound and voice number will
remain at 128. Similarly, if 1 is displayed and you
press either Y button or the COARSE and V
buttons, the voice number will remain at 1.
Advertisement
