Advertisement
FILL IN
1 Start the rhythm.
2 Press the FILL IN button when you want to add this feature.
FILL IN provides a variation to the basic rhythm pattern. At the time you press the
button, the Fill In pattern will play until the end of that measure, and the rhythm will
automatically return to the original pattern at the start of the next measure.
Шр IN
Ar N
[Additional Information]
@ Should you desire a longer Fill In pattern, hold
down the FILL IN button.
e lf you press the FILL IN button before starting
the rhythm, the Fill In pattern will act as an
intro.
INTRO.
/ ENDING E
] Press the INTRO./ENDING button and then
press the START button.
You will now hear a one measure
rhythm intro-
duction.
2 When you are almost finished with a song,
press the INTRO./ENDING button.
At the moment this button is pressed, an ending
pattern (two measures maximum) is played. As soon
as the ending pattern is completed, the rhythm will
stop automatically.
mm
INTRO.
E
START
NDING
HI
START
Y
[Additional Information]
@INTRO./ENDING
can be used even
when
Synchro
Start has been
used to start the
rhythm.
FOOT SWITCH E
ng
1 Choose a function by pressing one of the FOOT SWITCH selectors, then
start the rhythm.
-
=
RHYTHM — GLIDE
STOP.
(LEAD)
=>
=
"nr N
PULIN
2
ENDING $
[Features Controlled by the Foot Switch]
RHYTHM STOP
|Press the Foot Switch to stop the rhythm, and press it again to start the rhythm.
after which the rhythm is stopped.
FILL IN 1
The FILL IN 1 pattern is sounded when the Foot Switch is pressed.
FILL IN 2
The FILL IN 2 pattern is sounded when the Foot Switch is pressed.
ENDING
When the Foot Switch is pressed, the rhythm switches to the Ending pattern
"For information on the Glide effect, see page 15.
2 Press the Foot Switch toward the left.
During your performance, use your toes to press the
Foot Switch on the left side of the Expression Pedal
toward the left. This allows you to control the function
selected by the Foot Switch selector.
E
[The RHYTHM
STOP feature of the Foot
Switch}
When the rhythm is stopped by pressing the Foot
Switch, the RHYTHM STOP lamp begins flashing
and the rhythm is stopped. When the rhythm is
restarted by pressing the Foot Switch once more,
the lamp resumes its former lit status. In addition,
if you turn on the INTRO/ENDING button after
stopping the rhythm by the Foot Switch, then
press the Foot Switch once
more, you can
produce a one-measure introduction.
Advertisement
