Advertisement
REGISTRATION MEMORY
How to Memorize a registration EE]
@The assignment of VOICE MENU voices to the grey buttons.
© ON/OFF status of SUSTAIN, VIBRATO, TREMOLO/SYMPHONIC.
@ The Sustain Length and Vibrato Depth set by SUSTAIN/VIBRATO DEPTH.
€ The pattern selection and volume level of RHYTHM.
e The tempo of the rhythm.
e The selected function of the Foot Switch.
O The pattern selection and volume level of ARPEGGIO CHORD.
€ ON/OFF status of the KEYBOARD PERCUSSION buttons.
€ AUTO BASS CHORD.
@ MELODY ON CHORD.
€ ON/OFF status of TOUCH.
The lamp above the numbered button you
El
registration has been memorized here. Store
>
m.
=e
REGISTRATION
MEMORY
your other favorite registrations in the same
way,
utilizing
the
remaining
numbered
buttons.
1 Press one of the numbered buttons.
As soon as a numbered button is pressed, the
—
n
DISABLE
[Ihe
Memory
Area
for
User
Rhythm
Patterns] (HE-8 only)
For each Registration Memory button 1 to 5,
there is a memory area reserved for storing two
User patterns (USER 1 and 2). The same two User
patterns (WALTZ VARIATION and 16-BEAT 1) are
stored for all five buttons.
e When PACK data is transferred to the Electone,
however,
USER
patterns
1 and 2 may
be
replaced by other rhythm patterns. (page 25)
[The Memorization Operation and Button
Lamps]
Though the lamp of one of Registration Memory
buttons
1-5 is always lit, the memorization
operation for registration data can be performed
regardless of the ON/OFF status of the lamps.
When memorizing a registration to a lit
button: The new registration is stored at the lit
button. The pertinent lamp will flash during the
memorization process, then return to its lit status.
When
memorizing
a registration to an
unlit button: A new registration is stored at that
unlit button which already contains registration
data, but the memory contents of the lit button
remains unchanged. The lamp of the unlit button
will flash only during the memorization process,
then return to jts unlit status.
[Changing the Registration that You Called
to the Panel]
After calling a registration by pressing a numeric
button 1 to 5, you can partially change the
current
registration
by changing
the panel
settings.
In this case,
however,
the actual
Registration data memorized for that numeric
bütton will not be changed.
[Storing the Data Memorized in Registra-
tion Memory]
The data memorized in Registration Memory can
be stored for later use by transferring it to a RAM
Pack.
[The M. (Memory) Button}
In addition to being used to memorize registra-
tions, the red M. (Memory) button is also used
when transferring the Electone's data to a RAM
Pack, and so on.
[Back-Up of Registration Memory Data] ,
Even if the Electone is turned off, the data of
Registration Memory will be stored by an internal
back-up battery (for at least one week). If you
leave the Electone turned off for longer than a
week, however, the contents of the backed-up
Registration Memory will be replaced by the data
of the Basic Registrations.
[Back-Up of the Current
Panel Settings
After the Power is Turned Off]
Besides the contents of Registration Memory, the
panel registration that is currently set when the
Electone is turned off will also be stored by the
internal back-up battery. When you later turn the
Electone back on, the most recent panel registra-
tion will be called back to the panel.
|
w—rmmraaaa
DD
————————————————— LS
Advertisement
