Advertisement
FM VOICE PACK (HE-6)
=>For details on the FM Voice Pack of HE-8, see page 30.
1 Insert the FM Voice Pack (optional) into the Electone.
2 Press one of the voice buttons at the panel.
This step determines the voice button and voice
section you wish to use for checking the sound of the
Pack voice to be copied. Set the volume level for the
selected section. Although the FM Voice Pack contains
the data of multiple voices, this step allows you to
copy the data of one voice.
MAX
sms
Gë
a Ca
C JC JL )c
ТА
Gi
Ze
1
1
2.
C0
—
LOWER KEYBOARD:
3 Choose the number of the Pack voice you wish to copy.
n
сысы
'
4
A
COARSE — COPY
TEMPOIDATA Ț
Look at the voice list provided with the FM Voice Pack and check the number of the
Pack voice (Nos. 1 to 128) you wish to copy. Next, press the DATA button until the
desired number appears on the right side of the TEMPO display.
A
Each time this button is pressed, the displayed number is increased by one.
v
Each time this button is pressed, the displayed number is decreased by one.
If you press the A or V button while pressing this button, the displayed number
COARSE will increase or decrease by 10.
4 Listen to the selected Pack voice and decide if you wish to actually copy
that voice to the Electone.
When you press keys on the keyboard corresponding to the voice button you pressed
in Step 2, the selected Pack voice will be sounded. Listen to its sound to make sure you
want to copy it to the Electone.
5 While pressing the COPY button, press a numeric button in the USER
VOICE section to copy the selected Pack voice.
E
2
3—74 = үн
Y
A
COARSE
COPY
mm
e
ei
e
E
JAZZ
РРЕ
ACCOR- PIANO ELECTRIC
ORGAN
ORGAN
DION
COCO
If necessary, repeat Steps 2 through 5 to select and copy other voices in the FM Voice
Pack to other USER VOICE buttons.
27
[How to Sound a Copied FM Voice Pack
Voice]
Before a copied FM Voice Pack voice can be
sounded, it must be assigned to a grey button in
a voice section at the Electone's panel. While
pressing the USER VOICE button to which the
Pack voice was copied, press a grey voice button.
The grey button's lamp will light up to indicate
that the Pack voice has been assigned to it. To
sound the assigned Pack voice, turn on the that
grey button, set its volume level, then play the
corresponding keyboard.
[Transferring the FM Voice Pack Data to a
RAM Pack]
After you have copied voice data of an FM Voice
Pack to USER VOICE buttons at the Electone, you
can perform a TO PACK operation to transfer that
User voice data to a RAM Pack.
[Partial Copying of Voice Data from or to a
RAM Pack]
After you have transferred Registration Memory
data to a RAM Pack, you can later copy only the
User voice data back to the Electone.
With the RAM Pack inserted in the Electone,
press the COPY button @ while pressing the
FROM PACK button @ . Only the User voice data
will be copied back to the Electone.
ce
сы
сә
mm
DOC)
CONFIRM
READY
ERROR FROM PACK
Y
A
COARSE
COPY
PACK
ө
And if you press the TO PACK button while
pressing the COPY button, only the User Voice
data can be copied to the RAM Pack.
[Receiving Voice Data via MIDI]
Besides copying the voice data of an FM Voice
Pack and assigning it to USER VOICE, it is also
possible to create voice data using an external
input device, such as a personal computer, and to
receive that data at the Electone. The voice data
received at the Electone will be directly assigned
to the USER VOICE buttons.
[Additional Information]
When you are choosing a voice number, if 128
appears on the TEMPO display and you press
either the A button or the coarse and A buttons,
an alarm will sound and voice number will
remain at 128. Similarly, if 1 is displayed and you
press either Y. button or the COARSE and V
buttons, the voice number will remain at 1.
Advertisement
