Advertisement
Exchanging Data with HS Electone Using a RAM Pack
The HE-8 and HE-6 can exchange data with an HS Electone by using a RAM Pack. In
such case, however, be sure to heed the following precautions. (The procedures below
are described using the example of the HS-5 Electone. When transferring data with
other models in the HS Series, however, the data of USER VOICES 1-4 and of the
rhythm USER PATTERNS 1 and 2 can be transferred.)
HS-5 Data"* HE-8/HE-6
HE-8 and HE-6 do not have an EN-
SEMBLE section. Before memorizing
a registration at HS-5, therefore, be
sure to set its ENSEMBLE section as
shown below.
Select the ON/OFF status of each voice section by setting the volume level.
> The ENSEMBLE section can be used only to set the ON/OFF status of the PERCUS-
SIVE voice. In addition, if both the UPPER PERCUSSIVE and LOWER PERCUSSIVE
are turned off at the time the RAM Pack data is transferred to HE-8 or HE-6, the
button. Before memorizing a regis-
tration to the Registration Memory
> When the data of HE-8 or HE-6 is transferred to HS-5, all Registration data except the
Disable status will be set at the HS-5 panel exactly as it was memorized at HE-8 or
User Voices of HS-5 can be used by HE-8 and HE-6
Although USER VOICES 1 to 4 in the VOICE MENU of HE-8 and HE-6 contain preset
С
is ON
C] is OFF
ARPEGGIO CHORD feature of HE-8 or HE-6 will be turned on.
of HE-8 or HE-6, therefore, be sure
HE-6. (The data transferred from HE-8/HE-6 to HS-5 differs from the data transferred
HE-8/HE-6 Data"* HS-5
5
(C3)
to turn off the Disable (D.) button.
from HS-5 to HE-8/HE-6.)
HS-5 does not have a Disable (D.)
> At HS-5, the panel registration will be set as if the Disable (D.) button were off.
User Voices and User Patterns
voices (™page 12, 29), User voices which have been edited and memorized using the |
Voice Edit functions at HS-5 can be transferred via a RAM Pack and used by HE-8 and
HE-6. In addition, by using the Voice Edit functions to edit voices on the HS-5 VOICE
MENU and memorizing them as User voices at HS-5, such voices can also be used by
HE-8 and HE-6.
VOICE MENU
Du
SAXO-
PAN
SYNTH
EMT EMO
RITE T UM v
Jo
ACCOR. РАМО ELECTRIC HARPS. JAZZ STEEL ORGINAL
dëi ORGAN
"DON
CHORO GUITAR GUT
¿2558 CC
m
/
z
I
USER VOICE
A
or
es
PE
0000
ce
/
[HS-5]
User Patterns of HS-5 can be used by HE-8
Although the USER patterns (USER 1 and
USER 2) of HE-8 contain preset patterns
(™page
17), User patterns which have
been edited and memorized
using the
R.P.P. functions at HS-5 can be transferred
via a RAM Pack and used by HE-8. In
addition, by using the R.P.P. functions to
edit rhythm patterns on the HS-5 RHYTHM
MENU
and memorizing
them
as User
patterns 1 and 2 at HS-5, such rhythm
patterns can also be used by HE-8.
[VOICE MENU Voices that are Assigned to
Grey Buttons]
Any VOICE MENU voice which does not exist on
HE-8 or HE-6 and has been assigned to a grey
button at HS-5 will not be transferred to HE-8 or
HE-6. (However, COMBI. 1, PIPE ORGAN 1, and
ELECTRIC PIANO 1 of HS-5 will be respectively
transferred to HE-8 and HE-6 as JAZZ ORGAN,
PIPE ORGAN, and ELECTRIC PIANO.)
[The Vibrato Effect]
During a data transfer from HS-5 to HE-8/HE-6,
the Delay and Speed settings of User Vibrato for
a Lead Voice at HS-5 will be transferred to HE-8
or HE-6. After the Vibrato data of HS-5 is trans-
ferred to HE-8 or HE-6, if you wish to restore the
preset Vibrato effect at HE-8 or HE-6, press the
UPPER
LEAD
button in the HE-8 or HE-6
VIBRATO
section
while
you
depress
the
ORIGINAL VOICE button on its VOICE MENU.
[The Tremolo and Symphonic Effects]
The data will be transferred from HS-5 to HE-8 or
HE-6 as follows: (Please note the differences
indicated by the asterisk.)
(HS-5)
(HE-8 or HE-6)
Symphonic ON **Symphonic ON
*Celeste ON
ww Symphonic ON
Tremolo ON
>Tremolo ON
Chorus ON
"Chorus ON (Tremolo and
Symphonic OFF)
* Chorus ON (Tremolo and
Symphonic OFF)
*Tremolo and
Chorus OFF
[Data that is Only Transferred but not Used]
* Although the following data of HS-5 cannot be
used by HE-8 and HE-6 for performances, it will
be transferred into the memory of HE-8 or
HE-6:
data of Registration
Memory
6 and
higher; R.P.P. data of (Registration Memory) 6
and higher; and the data of R.C.P., R.S.P., and
F.M.P
. Therefore, the data memorized at HE-8 or HE-6
as a result of transferring data from HS-5 to
HE-8/ HE-6 can later be returned to HS-5 by
transferring the HE-8/HE-6 data back to HS-5.
(Even if a certain type of data used by HS-5 is
not
present,
the
HS-5
panel
setting
cor-
responding to that data item will be set to "data
not present.")
[Auto Rhythm]
Any rhythm patterns assigned to a dotted button
at HS-5 will not be transferred to HE-8 or HE-6.
[Auto Bass Chord]
In case of transferring data from HS-5 to HE-8/
HE-6, the LOWER
and PEDAL
data of the
MEMORY feature on the HS-5 MULTI-MENU will
not be transferred.
Advertisement
