Advertisement
TREMOLO/SYMPHONIC
The Tremolo/Symphonic effect can be applied to the ORCHESTRAL VOICES of the upper and
lower keyboards.
1 Choose an ORCHESTRAL VOICE for the upper or lower keyboard.
2 Turn on the UPPER
ORCHES.
or LOWER
ORCHES.
button
of the TREMOLO/SYM-
PHONIC section.
TREMOLO SYMPHONIC
-—
=
=
—
TREMOLO SYMPHO
LOWER
UPPER
NIC — ORCHES.—
ORCHES.
II"
3 Turn on the TREMOLO
or SYMPHONIC
button, then try playing the
corresponding keyboard.
REVERB (HE-8 only)
|
REVERB
adds a somewhat
echo-like effect to the sound, giving the impression
of a
performance in a concert hall.
Press a REVERB button to set the length of
reverberation.
The Reverb Length can be set to one of five levels.
Press the top button (MAX) for the longest reverbera-
tion, or press the bottom button (MIN) to cancel the
Reverb effect.
GLIDE (LEAD)
This effect lets you temporarily lower the pitch of the Lead Voice by a half step, then gradually
restore its normal pitch. (It is controlled by the Foot Switch)
1 Choose the Lead Voice, then turn on the
GLIDE (LEAD) selector at the FOOT SWITCH
section.
This sets the Foot Switch so that it controls the ON/
OFF status of the Glide effect.
=
-
RHYTHM
GLIDE
STOP
(LEAD)
=
=>
ниш
оким
1
2
2 While
you
play the upper
keyboard
to
produce the Lead Voice sound, press the
Foot Switch to the left.
When you press the Foot Switch, the pitch of the Lead
Voice is lowered by a half step; when you release the
Foot Switch, its normal pitch is gradually restored.
(Use of the Glide effect enables you to expressively
recreate the sliding techniques used for a trombone,
violin (fiddle), or guitar.)
[The CHORUS Effect]
By
turning
off
both
the
TREMOLO
and
SYMPHONIC
buttons, you can add a Chorus
effect which is a slower version of the TREMOLO
effect.
TREMOLO SYMPHONIC
=
=
=
mm
TREMOLO SYMPHO-
LOWER
rem
NIC
ORCHES.
rus
OUUU
Both buttons
Turn ON at least
are OFF.
one button.
[Additional Information]
The Tremolo and Symphonic effects are elec-
tronically
interlocked
and
cannot
be
used
simultaneously at the same voice section.
[The Applicable Range of REVERB]
The Reverb effect can be added to any voice in
any voice section and to any Arpeggio Chord
voice. It cannot be applied to the sounds of the
rhythm or Keyboard Percussion.
[The Glide Effect]
@While the Glide effect is being applied, the
Vibrato effect which has been set for the LEAD
VOICES becomes inactive.
@The Glide effect can also be applied to any
VOICE MENU voice which has been transferred
to a grey button in the LEAD VOICES section.
Advertisement
