Table of Contents
Advertisement
3.
Magnetic pole detection error
Turn power off and check slider
movement by moving it by hand.
Check wiring by referring to
robot manual.
Magnetic pole detection error
Motor wire is disconnected.
NO
External force or friction is applied
to slider when power is turned on.
NO
Robot mechanical movement is
heavy at point where power is
turned on.
NO
Connector wiring is incorrect.
NO
Consult us.
Magnetic pole detection error
YES
Securely make connections.
YES
Remove external force and
friction and restart the robot.
YES
Repair the robot. *
* Try to turn on power in another
place to check whether the robot
operates normally.
YES
Correct wiring or replace
defective connector pins.
Requires repair or parts replacement.
Contact us.
5
5-3
Advertisement
Table of Contents
