Table of Contents
Advertisement
Maintenance
The
and
Finish at
not available in maintenance
programmes.
Soak
You can use this maintenance
programme to soak stubborn soiling.
Take the accessories out of the oven
compartment.
Remove coarse soiling with a cloth.
Select
|
Other
Follow the instructions in the display.
Risk of injury due to hot steam.
At the end of the maintenance
programme, a lot of hot steam can
escape when the door is opened.
The steam can cause burns.
Step back and wait until the hot
steam has dissipated.
Once soaking is complete,
immediately remove the water and
condensate from the oven
compartment and drip channel using
a sponge or soft cloth.
Then dry the oven compartment and
the inside of the door with a cloth.
Useful tip: Once you have run the
Soak
maintenance programme, we
recommend that you run the
Drying
maintenance programme to also
remove moisture from inaccessible
areas of the oven compartment.
functions are
Start at
Maintenance
|
Soak
Drying
You can use this maintenance
programme to dry any residual moisture
in the oven compartment, including in
inaccessible areas, and protect the
oven against corrosion.
The
maintenance programme
Drying
consists of up to 3 phases: residual
water evaporation in the empty oven
compartment, drying by heating up the
oven compartment and rapid cooling
with the door slightly open.
.
Risk of infection due to
contaminated water in the water
container.
Germs can form in the water
container if you do not run the
maintenance programme. This
Drying
contaminated water could be
injected onto the food during the
next cooking process.
Run the
Drying
programme to ensure that all residual
water fully evaporates.
Select
Other
Drying
.
Follow the instructions in the display.
Use a sponge or soft cloth to remove
any water and condensation in the
oven compartment and drip channel.
If the
Drying
has finished, switch off the steam
combination oven.
Cleaning and care
maintenance
|
Maintenance
maintenance programme
|
89
Advertisement
Table of Contents
