HMS Networks Intesis IN770AIR00 O000 Series User Manual page 36

Integration into KNX Systems
Object name
Status_OXXUXX_WindFree
Control_OXXUXX_Air clean
Status_OXXUXX_Air clean
Control_OXXUXX_360 CST air flow direction
Status_OXXUXX_360 CST air flow direction
Status_Consumption Yesterday
Status_Consumption Today
Status_Consumption Total
Status_Consumption Yesterday Heat
Status_Consumption Today Heat
Status_Consumption Total Heat
Status_Consumption Yesterday Cool
Status_Consumption Today Cool
Status_Consumption Total Cool
NOTE
The default unit for the consumption signals is Wh, but you can set it in KWh instead. If so, the DPT
number changes from 13.010 to 13.013.
USER MANUAL Version 1.0.6
Possible values
0: Off
1: On
0: Off
1: On
0: Off,
1: On
0: Spot
1: Mid
2: Wide
3: Swing
0: Spot
1: Mid
2: Wide
3: Swing
Wh/KWh
Wh/KWh
Wh/KWh
Wh/KWh
Wh/KWh
Wh/KWh
Wh/KWh
Wh/KWh
Wh/KWh
Samsung NASA with KNX, Serial and IP support
DPT
1.001-DPT_Switch (1bit)
1.001-DPT_Switch (1bit)
1.001-DPT_Switch (1bit)
5.x (1byte)
5.x (1byte)
13.010: active energy (Wh) (4byte)
13.010: active energy (Wh) (4byte)
13.010: active energy (Wh) (4byte)
13.010: active energy (Wh) (4byte)
13.010: active energy (Wh) (4byte)
13.010: active energy (Wh) (4byte)
13.010: active energy (Wh) (4byte)
13.010: active energy (Wh) (4byte)
13.010: active energy (Wh) (4byte)
Page 33 of 44
Flags
R, T
W
R, T
W
R, T
R, T
R, T
R, T
R, T
R, T
R, T
R, T
R, T
R, T