Panasonic NN-CT569M Operating Instructions Manual page 5

Heater Operation
1. Before using CONVECTION,
COMBINATION or GRILL function for the
first time, wipe excessive oil off in the oven
cavity and operate the oven without food
and accessories on CONVECTION 250°C,
for 20 minutes. This will allow the oil that is
used for rust protection to be burned off.
This is the only time the oven is used
empty.
2. Exterior oven surfaces, including air vents
on the cabinet and the oven door will get
hot during CONVECTION, COMBINATION
and GRILLING, take care when opening or
closing the door and when inserting or
removing food and accessories.
3. The oven has two quartz heaters situated
in the top of the oven. After using the
CONVECTION, COMBINATION and GRILL
functions, care should be taken to avoid
touching the inside surfaces of the oven, as
these will be very hot.
N.B. After cooking by these modes, the
oven accessories will be very hot.
4. The accessible parts may become hot in
CONVECTION, COMBINATION and GRILL
use. Young children should be kept away
and children should only use the oven
under adult supervision due to the
temperatures generated.
Fan Motor Operation
While the oven is in Microwave/Heater
operation, the cooling fan always rotates to
cool the electric components. After the
completion of operation, the fan may continue
rotating for a while. This is perfectly normal,
and you can take out the food from the oven
while the fan is still in operation.
Oven Light
When it becomes necessary to replace the
oven light, please consult your dealer.
Accessories
The oven comes equipped with a variety of
accessories. Always follow the directions given
for use of the accessories.
Safety Instructions
Glass Tray
1. Do not operate the oven without the roller
2. Never use another type of glass tray than
3. If the glass tray is hot, let it cool before
4. The glass tray can turn in either direction.
5. If the food or cooking vessel on the glass
6. Do not cook foods directly on the glass
Roller Ring
1. The roller ring and the oven floor should be
2. The roller ring must always be used for
Metal Tray
1. The Metal Tray is for cooking on Grill,
2. The Metal Tray should be placed on Glass
Wire Rack
1. The Wire Rack is used to grill small dishes,
2. Do not use any metal container directly on
3. Do not use the Wire Rack in MICROWAVE
ring and the glass tray in place.
the one specially designed for this oven.
cleaning or placing in water.
tray touches the oven walls and stops the
tray rotating, the tray will automatically
rotate in the opposite direction. This is
normal.
tray, except when cooking Jacket Potatoes
in microwave mode.
cleaned frequently to prevent noise and
build-up of remaining food.
cooking together with the glass tray.
Convection and Combination modes.
Do not use Metal Tray in Microwave mode
only.
Tray or Wire Rack.
and help with the circulation of heat.
the Wire Rack in COMBINATION with
MICROWAVE.
mode only.
En-3