Technical Assistance; Product Return; Warranty; Disposal - Ismatec MasterFlex IPC 45 RPM Operating Manual

Section 5: Service & Maintenance

TECHNICAL ASSISTANCE

If you have any questions about the use of this product contact the manufacturer or authorized seller.

PRODUCT RETURN

Like all pumps, the IPC pumps contain components that will wear over a period of time. To limit charges
and delays contact the seller or manufacturer for authorization and shipping instructions before returning the
product, either within or outside of the warranty period. When returning the product please state the reason
for the return. For your protection, pack the product carefully and insure it against possible damage or loss.
Any damages resulting from improper packaging are your responsibility.

WARRANTY

Visit www.avantorsciences.com/masterflex

DISPOSAL

Please retain packaging materials until the product warranty ends. Afterwards please discard of any packaging
materials in an environmentally friendly manner and according to local regulations.
Once the useful life of the product has ended, please ensure proper disposal according to local laws. Plastic
and electronic components should be disposed of at a recycling facility. Please refer to local regulations
regarding proper disposal.
5-7 Masterflex Ismatec Multichannel Peristaltic Pumps
® ®
for warranty information.