Baking Sensor; Applying Settings For Dishes - Siemens CS658GR 7 Series Instruction Manual

Hide thumbs Also See for CS658GR 7 Series:
Table of Contents

Advertisement

Categories
Food
Fish, whole
Fish fillets
Fish steaks
Fish
Fish dishes
Seafood
Potatoes
Rice
Cereals
Side dishes, vegeta-
bles
Pulses
Pasta, dumplings
Eggs
Crème caramel
Yeast dumplings
Yogurt in glass jars
Dessert, compote
Rice pudding
Fruit compote
Preserving
Preserve, juice, ster-
Extracting juice
ilise
Sterilising bottles
Menu
Baked goods
Reheat, crisp up
Side dishes
Fruit, vegetables
Defrosting food

Baking sensor

Your appliance is equipped with a baking sensor.This
sensor is automatically activated when you select a
baked item from any of the following categories in the
selection list. If the baking sensor has been activated,
the
symbol appears on the display.
H
Category
Food
Cake
Cake, bread, pizza
Small baked items
Savoury cakes, pizza,
quiche
Frozen products
Potato products
The appliance now takes over.The appliance then
regulates the baking process completely automatically
– you do not need to implement any further settings.
Once the food is cooked, the appliance will switch itself
off automatically. An audible signal will then sound. The
cooking time is roughly the same as that listed in the
recipe for your baked item and is not displayed. The
Dishes
Cakes in tins
Cakes on trays
Pies/tarts
Puff pastry
Muffins
Leavened cake
Savoury cakes, quiche
Pizza
Tarte flambée
Potato products
oven sensor can only be started from the oven when it
is cool.
No other baked goods categories are monitored by the
baking sensor. In this case, you will be offered a tried
and tested setting with customisation options.
Dark-coloured metal baking tins are suitable. Do not
use any silicone bakeware or accessories that contain
silicone. Otherwise, the baking sensor will be damaged.
The baking sensor is active while "Do not open door" is
shown on the display. Do not open the appliance door;
otherwise, the settings will be cancelled. The appliance
asks you whether you wish to continue cooking. The
appliance will continue to heat and you can adjust the
suggested time. You must monitor the process yourself.

Applying settings for dishes

You will be guided through the entire setting process for
your chosen food. Always touch the "Next" field.
Press the menu button.
1.
The operating modes menu will open.
Select "Dishes" mode.
2.
The first category will appear on the display.
Use the rotary selector to select the category you
3.
require.
Touch the "Next" field.
4.
Use the rotary selector to select the food.
5.
Touch the "Next" field.
6.
Use the rotary selector to select the dish.
7.
Touch the "Next" field.
8.
Turn the rotary selector to set the weight.
9.
Touch the "Tip" field for information on the
Note:
best shelf position, cookware, etc. to use.
Press the Start/Stop button to start.
10.
Once you have implemented all the settings, start the
appliance by pressing the Start/Stop button.
For settings that use steam, the appliance only starts
after it has heated up.
The setting has ended
A signal sounds. "Finished" appears in the status bar.
The oven stops heating. You can cancel the audible
signal early using the
0
If you are not satisfied with the cooking result, you can
increase the cooking time again. Touch the "Extend
cooking time" field. A cooking time is suggested.
However, you can change this if you want.
If you are satisfied with the cooking result, touch
"Finish". "Enjoy your meal" appears in the display.
Cancelling the setting
Press the On/Off button. All settings are deleted. You
can implement new settings.
Setting a later end time
For some dishes, it is possible to set a later end time.
You can find out how to set a later end time by looking
in the time-setting options. ~ "Time-setting options"
on page 20
Once you have set an end time, the display shows the
waiting time. The status bar shows the time at which
Dishes
button.
en
37

Advertisement

Table of Contents
loading

Table of Contents