Thread Cutter Switch - ELNA eXcellence 792PRO Instruction Book

1.
(2)
2.
(3)
3.
4.

Thread Cutter Switch

If you wish to use the thread cutter switch, pull out the
cord from the foot control and insert the pin connector
into the jack on the machine.
Preparation for Thread Cutter Switch
1. Remove the cable tie from the cable.
(1)
(1) Cable tie
2. If you wish to use the thread cutter switch, you need
to connect it with the foot control.
Insert the pin connector into the jack on the foot
control.
(2) Pin connector
(3) Jack
3. Turn the foot control upside down.
Open the cover of the foot control.
4. Draw out the cable from the foot control.
13