Table of Contents
Advertisement
(2)
(1)
(3)
After sewing, depress the thread cutter switch on the
right side of the foot control to trim both the needle and
bobbin threads.
Do not depress the thread cutter switch until the start/
stop button turns blue (2).
(1) Thread cutter switch
NOTE:
• Threads are trimmed when the thread cutter switch
is depressed for more than 0.5 seconds.
• The thread cutter switch does not work without the
foot control being depressed first.
• Bundle the cables with the cable tie as necessary.
(3) Cable tie
Controlling Sewing Speed
Speed Control Slider
You can limit the maximum sewing speed with the speed
control slider according to your sewing needs.
To increase the sewing speed, move the slider to the
right. To decrease the sewing speed, move the slider to
the left.
The sewing speed can be changed while stitching.
Foot Control
Pressing on the foot control can vary sewing speed.
The harder you press the foot control, the faster the
machine runs.
NOTE:
• The machine runs at the maximum speed set by
the speed control slider when the foot control is fully
depressed.
• You can select the desired start-up speed from slow,
medium or high (refer to page 140).
NOTE:
This machine is equipped with an automatic shutdown
safety feature to prevent overheating whenever the
machine is running overloaded. Follow the safety
instructions that appear on the visual touch screen.
14
Advertisement
Table of Contents
