Manual Dual Feed Setting - ELNA eXcellence 792PRO Instruction Book

(6)
(7)
(8)
134

Manual Dual Feed Setting

If you wish to sew patterns other than U1 to U5 and Q1 to
Q7 with the dual feed drive, turn on the manual dual feed
setting.
Press the ON key of the manual dual feed setting.
(6) ON key
NOTE:
The sewing results of the manual dual feed sewing
may vary depending upon sewing conditions. Always
make a test stitch on an extra piece of the fabric to
check the sewing results.
You may need to adjust the dual feed balance depending
on the type of fabric. Refer to page 42 for how to adjust
the dual feed balance.
(7) Adjusting dual feed balance
Turn off the manual dual feed setting when the manual
dual feed sewing is finished.
NOTE:
• The dual feed key will gray out if the manual dual
feed setting is turned on.
• The patterns U8 and B14, and the sewing
applications that are not suitable for the manual dual
feed setting are grayed out and cannot be selected.
(8) Dual feed key
NOTE:
If the drop feed key in the sewing setting mode is
turned on, the manual dual feed setting will gray out.
If the pattern or sewing application with the feed dogs
down is selected, the manual dual feed setting will
gray out.