Peavey DPM V3 Owner's Manual page 89

polyphonic pressure sends out data for each individual key being pressed down. The
DPM V3 responds to Mono pressure only. Values range from 000 to 127.
Program Change Sending a program change command from a sequencer or other
MIDI keyboard can change synth patches automatically. There are 128 program
change command numbers.
Pitch Bend This "bends" a note from its standard pitch, which is excellent for
creating lead guitar effects. The degree of response to pitch bend sensitivity is ad-
justable for each DPM V3 program, but to prevent confusion you might want to set
them all to the same value.
Continuous Controller Footpedals, breath controllers, and modulation wheels can
vary sounds as you play, thus adding expressiveness. MIDI allows for 64 continuous
controllers (these act like potentiometers in that you can choose one of many different
values) and 58 switch controllers (these «choose between two possible states, such as
on/off). Each type of controller is stamped with its own controller identification number.
Not all controller numbers have been standardized for specific functions, but the
following indicates the current list of assigned controllers. Numbers in parenthesis in-
dicate the controller range.
1 Modulation Wheel (0-127)
2 Breath Controller (0-127)
3 Early DX7 Aftertouch (0-127)
4 Foot Controller (0-127)
5 Portamento Time (0-127)
6 Data Slider (0-127)
7 Main Volume (0-127)
8 Balance (0-127)
10 Pan (0-127)
11 Expression (0-127)
16 General Purpose #1 (0-127)
17 General Purpose #2 (0-127)
18 General Purpose #3 (0-127)
19 General Purpose #4 (0-127)
32-63 Least Significant Bits, Controllers
0-31 (0-127; not offen used and
therefore not accessible from
the DPM V3)
64 Sustain Pedal (0 or 127)
65 Portamento On/Off (0 or 127)
66 Sustenuto Pedal (0 or 127)
67 Soft Pedal (0 or 127)
69 Hold 2 (0 or 127)
80 General Purpose #5 (0 or 127)
81 General Purpose #6 (0 or 127)
82 General Purpose #7 (0 or 127)
83 General Purpose #8 (0 or 127)
92 Tremolo Depth (0-127)
93 Chorus Depth (0-127)
94 Celeste Depth (0-127)
95 Phase Depth (0-127)
96 Data Increment (0 or 127)
97 Data Decrement (0 or 127)
98 Non-Registered Parameter MSB
(0-127)
99 Non-Registered Parameter LSB (0-127)
100 Registered Parameter MSB (0-127)
101 Registered Parameter LSB (0-127)
121 Reset All Controllers (0)
122 Local Control On/Off (0 or 127)
123 All Notes Off (0)
124 Omni Off (0) 125 Omni On (0)
126 Mono On (0-16; 05Omni Off)
127 Poly On (0)
7A