Parameters - Peavey DPM V3 Owner's Manual

Chooses the DCA1 level modulation source. The Off setting by passes DCA1 (i.e.,
oscillator 1's level is set solely by the level parameter).
For details on modulation sousrces, see sections 3.1d and 3.8.
Amount (-99 to +99)
Sets the modulation degree and polarity (positive or negative) from the previously-
selected source. This modulates the baseline level set by the oscillator's level
parameter (see figure below).
positive modulation
99 increases base
level setting
E
N
DCA oscillator level parameter
Level [e---2-c vene e ran uoo
negative modulation
' lowers base level
setting
How modulation affects the DCA level
Page 2 Parameters
LMod2 Amount
These parameters perform the same function as LMod1 and its associated Amount
control. Thus, DCA1's level can be modified by two different modulation sources.
Applications using positive modulation amounts: Use Velocity as a modulation source
to have levels track the dynamics of your playing; Keyboard to have notes become
progressively louder as you play progressively higher up on the keyboard; Pressure to
increase the oscillator level with increased keyboard pressure; Envelopes to create
specific changes in dynamics over time; LFO to add tremolo effects; Mod Wheel to
use the mod wheel as a volume control for the oscillator; Footpedal to provide foot-
controlled volume; and External MIDI control to alter parameters via a particular MIDI
continuous controller your keyboard or other MIDI data generator might send.
3.11