Peavey DPM V3 Owner's Manual page 54

Hide thumbs Also See for DPM V3:
Table of Contents

Advertisement

Link# Program
Selects the desired program for the selected link, as shown on the bottom line. If no
program is currently selected, the display will say --OFF--- The first link cannot be
changed, since it represents the original program.
Page 3 (COMBI Link#) Parameters
LoKey (C-1 to G9)
This sets the low end of the link's keyrange. Example:
To have a link play only in the
range of C2-G3, set LoKey to ge
Ta
Y
*
HiKey (C-1 to G9)
Page 4 (COMBI Link#) Parameters
LoVel (000 to 127)
HiVel (000 to 127)
The selected link will not play if the note velocity is higher than this value. Example:
To have a link play only if the velocity is between 000 and 080, set HiVel to 080.
Page 5 (COMBI Link#) Parameters
DTune (-99 to +99 cents)
TrPose (-24 to +24 semitones)
Transposes the selected link's frequency in semitone steps, from -24 (transposed down
two octaves) to +24 (transposed up two octaves).
7i
3.26

Advertisement

Table of Contents
loading

Table of Contents