Peavey DPM V3 Owner's Manual page 12

to the MIDI supplement if you are confused about the difference between in-
dividual MIDI modes.
Audio: Referring to the figure below, plug the Main left and right outputs in-
to a suitable amplification system or mixer. You have three main options,
one mono and two stereo.
e Option 1 Mono Run: a mono cord from either the left or right Main out-
put to your amplifier.
* Option 2 Stereo: Connect two mono cords from the left and right Main
outputs to a stereo amp or two mixer inputs. If you need a keyboard
mixer, Peavey makes the PLM™ 8128 (an automated mixer that
responds to MIDI program changes) and the Linemix™ 8, a standard,
lower-cost, eight-input line mixer.
e Option 3 Stereo: Connect a stereo cord (i.e., with tip, ring, and sleeve
connections) from the léft Main output (the one labelled STEREO — im-
portant!) to a matching Stereo connector in your amplifier or mixer.
MIDI out thru in sub2. subi main
OOO 900e9o0 OF
I
sub2 subi main
sub2 sub! main
two mono
cords
stereo (tip/
ring/sleeve)
input
inputs
amp or mixer amp or mixer amp or mixer
MIDI: Run a MIDI cable from the master keyboard's MIDI out to the
DPM V3's MIDI in. To drive additional tone modules from the same
keyboard, patch the DPM V3 MIDI thru output to the next tone module's
MIDI in. Patch the second module's thru into an additional module's MIDI
in, and so on.
13