1.
o
affect the integrity of the MIDI data.
1.2e Powering Up
Turn on your equipment in the following order (this is good practice for any
MiDl/audio setup, not just the DPM V3):
* Computer or sequencer (if present)
e Synthesizers, sound generators, and signal processors
* Mixer (with master outputs turned all the way down!)
* Amplification system
Turn up the mixer master output controls to a low level as you test out the
System. Turn up to normal volume once you're satisfied that the system is working
properly.
GETTING AROUND THE DPM V3:
THE FRONT PANEL
There are four main programming tools:
1.6