Peavey DPM V3 Owner's Manual page 86

Chapter 6 — Advanced Applications
6.1 MAKING THE MOST OF THE SIX OUTPUTS
The six outputs are very flexible. Some of the options are:
Six individual mono outputs. In a Multi setup with six sounds, pan sound #1 full
right and sound #2 full left, then assign these to output pair 1+2. Pan sound #3 full
right and sound #4 full left, then assign these to output pair 3+4. Pan sound #5 full
right and sound #6 full left, then assign these to output pair 5+6. Each sound will
now appear over its own output jack.
Combinations of stereo and mono outputs. Combine the two approaches above to
create both stereo and some mono: outputs.
The Sub output jack pairs are wired so that you can hook up external signal pro-
cessors to signals assigned to output pair 3--4 (sub 1) and 54-6 (Sub 2). Each output
pair goes through its own signal processor before being routed back to the DPM V3;
their outputs then show up over the Main outputs (1 +2).
would be routed so that Sub 2 is processed through an external stereo signal pro-
cessor.
MID! out thru in sub
subi main
stereo plugs ——»-
connects connects
to stereo 1o stereo
plug ring
plug ring
connects
~@— to stereo
plug tip
connects:
to stereo
plug tip
mono »
plugs
external
signal
processor
(ubu) ul pena (1 —]
(61) no para (ÈL
—] (uei) mo poa (E 1- —]
(ual) ul 19843
6.1