ELNA EnVision 8006 Instruction Manual page 36

i
Ny
if s
ae S eae
AANA
= (@)
* ©
|
HANAN
H
i
NM
AYA
NVAYANANAAIY
ama)
HANA
=? ©
en
rane)
wet IC)
33
Sensor Buttonholes (cont'd)
#12 Classic Buttonhole
The buttonhole will automatically sew:
@ the front bartack and zigzag on left side
@ straight stitch on right side to front bartack
@) zigzag on right side
@ back bartack and stop.
#13 Stretch Buttonhole
The buttonhole will automatically sew:
@ the front bartack and zigzag on left side
@®) the back bartack
@) zigzag on right side and stop.
#14 Keyhole Buttonhole
The buttonhole will automatically sew:
@) the front left half of keyhole, zigzag on left
side, and straight stitch on right side to front
@® front right half of keyhole and zigzag on right
side
@) back bartack and stop.
The machine signals you when the buttonhole is
finished. The display message will read "Completed"
and the machine will sound a series of beeps.
To sew another buttonhole, simply lift presser foot,
move fabric and begin sewing next buttonhole.
To cut the buttonhole open, place a pin just inside the
bartack (to prevent accidentally cutting bartack) and
use a seam ripper.
When buttonhole sewing is finished, push the
buttonhole lever upward as far as it will go.