Foot Pressure Dial Wo; Sewing On Heavy Fabrics; Controlling Sewing Speed; Eee Cece Cee Eeseesteeneeeeees - ELNA EnVision 8006 Instruction Manual

Foot Pressure Dial
The foot pressure dial should be set at "3" for
traditional sewing. Reduce the pressure to "2" for
applique, cutwork, drawn work, basting and
embroidery.
Velours and knits with a lot of stretch may require a
"1" setting.
@ Setting mark
Sewing on Heavy Fabrics
The black button on presser foot A locks the foot in a
horizontal position when pushed in before lowering
the presser foot. This ensures even feeding at the
beginning of seams and helps when sewing many
layers of fabric such as welt seams used to hem
jeans.
When the point of an increased thickness is reached,
lower the needle and raise the presser foot. Press in
the black button. Lower the foot and continue sewing.
This button releases automatically after a few stitches
have been sewn.
Controlling Sewing Speed
Sewing speed varies with the foot control. The harder
you press on the foot control, the faster the machine
runs.
Computer Display Screen
Brightness Control
Display screen lightens or darkens for visibility by
turning the dial located under the top cover in front of
the foot compartment.