Screen Messages - ELNA EnVision 8006 Instruction Manual

Screen Messages
@ The computer display screen shows "Bobbin
winding".
After the bobbin is wound, return the bobbin
winder to its original position by moving the
spindle to the left.
@ Raise the needle bar by pressing the up/down
needle key.
(This message will appear when the machine
is turned on with the needle not in its up
position.)
@ Turn machine off and insert the EnVision Card
again.
& TURN OFF AND
INSERT CARD
@ Stop operating the machine until this message
disappears (about 15 seconds).
STOP FOR SAFETY PURPOSES
© Contact your Authorized Elna Dealer.
SYSTEM ERROR
CAUTION
¢ Do not touch the surface of the computer display
screen or program panel keys with hard or sharp
objects such as pencils or screwdrivers. It is not
necessary to press hard on the stitch/ftunction
keys; a light touch is all that is needed.
¢ Use a dry, soft cloth to wipe off the screen.
11