Editing - Sony DCR-PC110 Operating Instructions Manual

-- Editing --
Dubbing a tape
Using the AJV connecting cable
Connect your camcorder to tile VC'R using tile A/V connecting cable supplied with
your can-lcorder.
(1) Insert a blank tape (or a tape you want to record over) into the VCR, and insert
the recorded tape into your camcorder.
(2) Prepare tile VCR for recording, then set tile input selector to LINE.
Refer to the operating instructions of the VCR.
(3) Set the POWER switch to VCR.
(4) Play back the recorded tape oil your camcorder.
(5) Start recording oil the VCR. Refer to tile operating instructions of your VCR.
AUDIO/VIDEO
IN
@ S VIDEO
® VIDEO
VCR
56
: Signal
flow
When you have finished d,,bbing a tape
Press • on both your can-lcorder and tile VCR.
Before a dubbing
Set DISPLAY to LCD in the menu settings. (Tile def_ult setting is LCD.)
Be sure to clear the indicators from the screen
If they are displayed, press the fbllowing buttons not to record tile indicators on tile
dubbed tape:
DISPLAY
DATA CODE on the Remote Commander
SEARCH MODE on the Remote Commander
You can edit on VCRs that support the following systems
[] 8 ram, FIlial Hi8, _ VHS, SVUSl S VHS, [V!i_IRVHSC SVlglii] S VHSC,
n] Betamax, _ ED Betamax, _"I_" mini DV, l_" DV, 1} Digital8
If your VCRis a monaural type
Connect the yellow plug of tile A/V connecting cable to tile video input jack and the
white o1"tile red plug to tile audio input jack on tile VCR or tile TV. When the white
plug is connected, tile left channel audio is output, and the red plug is connected, the
right channel audio is output.
If your VCRhas an S video jack
Connect using an S video cable (not supplied) to obtain high quality pictures.
With this connection, you do not need to connect tile yellow (video) plug of the A/V
connecting cable.
Connect an S video cable (not supplied) to tile Svideo jacks of both your camcorder and
the VCR.
This connection produces higher quality DV fbrmat picttnes.