As A Still Image - Sony DCR-PC110 Operating Instructions Manual

Recording an image from a mini DV tape
as a still image
Your camcorder can read moving pictnre data recorded on a mini DV tape and record it
as a still image on a "Memo1 T Stick". Yore camcorder can also take in moving pictnre
data through the input connector and record it as a still image on a "Memo1 T Stick."
Before operation
• Insert a recorded mini DV tape into yon] camcorder.
• Insert a "Memory Stick" into your camcorder.
(1) Set the POWER switch to VCR.
(2) Press _. The picture recorded on the mini DV tape is played back.
(3) Keep pressing PHOTO lightly until the picture fi'om the mini DV tape fi'eezes.
CAPTURE appears on the LCD screen or in the viewfinder. Recording does
not start yet.
(4) Press PHOTO deeper. The ilnage displayed on the screen will be recorded on a
"Memory Stick." Recording is complete when the bar scroll indicator
disappears.
3
2
llllllll_i i
Image size of still images
Image size is automatically set to 640 × 480.
When the access lamp is lit or flashing
Do not shake o1"strike the unit. As well do not thin the power off, eject a "Memory
Stick" o1"remove the battery pack. Otherwise, the image data breakdown may occur.
If "_" appears on the LCD screen or in the viewfinder
The inserted 'Memory Stick" is incompatible with your eamcorder because its format
does not conform with yore camcorder. Check the format of the "Memory Stick."
If you press PHOTO lightly in the playback mode
Your camcorder stops momentalily.
108