Sony DCR-PC110 Operating Instructions Manual page 146

Troubleshooting
Symptom
The title is not recorded.
The cassette label is not recorded.
Digital i)rogram editing does not
function.
The Remote Commander supplied
with your camcorder does not work.
The picture from a TV o1"VCR does
not appear even when youF
camcorder is connected to output oi1
the TV o1"VCR.
Cause and/or Corrective Actions
• Tile tape has no cassette memory.
") Use a tape with cassette memo1T. (p. 77)
• The cassette memory is ftflh
") Erase unnecessa W title. (i7. 79)
• The tape is set to prevent accidental erasure.
") Slide the write protect tab so that red portion is not
visible. (i7. 14)
• The tape has a blank portion in the recorded portion.
") Superimpose the title to the recorded position. (i7. 77)
• The tape has no cassette memo W.
") Use a tape with cassette memo1T. (p. 82)
• The cassette memory is fifth
") Erase unnecessa W data. (i7. 83)
• The tape is set to prevent accidental erasure.
") Slide the write protect tab so that red portion is not
visible. (i7. 14)
• The input selector on the VCR is not set correctly.
") Check the connection and set the input selector on the
VCR again. (i7. 58)
• The camcorder is connected to DV equipment of other
than Sony.
+ Set it to IR. (p. 59)
• Setting program on a blank portion of the tape is
attempted.
") Set the PROGRAM again on a recorded portion. (p. 66)
• The camcorder and the VCR are not synchronized.
") Adjust the synchronicity. (i7. 64)
• COMMANDER is set to OFF in the menu settings.
+ Set it to ON. (p. 84)
• Something is blocking the infiared rays.
") Remove the obstacle.
• The batteries are inserted in the batte W hoMer with the +
polarities incorrectly matching the + marks.
") Insert the batteries with the correct polarity. (p. 164)
• The batteries are dead.
") Insert new ones. (i7. 164)
• Display is set to V OUT/LCD in the menu settings.
+ Set it to LCD. (i 7 . 84)
146