Focusing manually
To focus precisely
It is easier to focus on the subject if you adjust the zoom to shoot at the "W" (wide
angle) after fort/sing
at the "T" (telephoto)
position.
When you shoot
close to the subject
Focus at tlle end of tlle "W" (wide angle) position.
_'_ changes as follows:
when recording
a distant
subject
--=when tile subject is too close to focus on
Focal distance
information
is displayed
as _
1.2 m for about 3 seconds on the LCD
screen or in the viewfinder
in the following
cases:
When switrhing
the forus adjustment
mode flora autoforus
to manual
When tinning
the focus ring
Focal
distance
information
This
inf_ormation
is aids
focusing
if it is not
easy
to focus
on the
subject,
for example,
when
recording
in the dark.
Use this
information
as a rough
guide
to get a sharp
fOCUS.
You cannot get correct inf_ormation if you have attached a conversion lens to your
Call-lcorder.
When focal distance is from more than 50 m to _, focal distance infomation is
displayed as _ 50 m.
46