Sony DCR-PC110 Operating Instructions Manual page 143

Troubleshooting
Symptom Cause and/or Corrective Actions
Tile picture is recorded in incorrect or • NIGHTSHOT is set to ON.
unnatural colors. + Set it to OFF. (p. 21)
Picture appears too bright, and the * NIGHTSHOT is set to ON in a bright place.
subject does not appear oll the LCD -) Set it to OFF. (p. 21)
screen o1" in the viewfinder.
The click of the shutter does not * BEEP is set to OFF in the menu settings.
sound. -} Set it to MELODY or NORMAL. (p. 84)
Black bands appear when you + Set the STEADYSHOT in the menu settings to OFF.
record TV or computer screen. (p. 84)
An external flash (not supplied) does • The POWER switch is set to OFF (CHG) or the power
not work. source does not installed.
÷ Set it to CAMERA or install the power source.
• Two or more external flashes (not supplied) are attached.
÷ Only one external flash (not supplied) can be attached.
Symptom
The tape does not move when a
video control button is pressed.
The playback button does not work.
There are horizontal lines on the
picture or the playback picture is not
clear or does not appear.
No sotmd or only a low sotmd is
beard when playing back a tape.
Displaying the recorded date, date
search ftmction does not work.
The title search flmction does not
work.
The new sotmd added to the
recorded tape is not heard.
The title is not displayed.
Cause and/or Corrective Actions
• The POWER switch is not set to VCR.
÷ Set it to VCR. (p. 24)
• The tape has rtm out.
") Rewind the tape. (p. 26)
• The video head may be dilty.
") Clean the heads using the cleaning cassette (not
supplied). (p. 153)
• The volume is turned to minimum.
") Tmn up the volume. (p. 24)
• AUDIO MIX is set to ST2in the menu settings.
+ Adjust AUDIO MIX. (p. 84)
• The tape has no cassette memo_T.
÷ Use a tape with cassette memo W. (p. 52)
• CM SEARCH is set to OFF in the menu settings.
+ Set it to ON. (p. 84)
The tape has a blank portion in the recorded portion.
(p. 53)
• The tape has no cassette memory.
-_ Use a tape with cassette memory. (p. 51)
• CM SEARCH is set to OFF in the menu settings.
-) Set it to ON. (p. 84)
• There is no title in the tape.
÷ Superimpose the titles. (p. 77)
• The tape has a blank portion in the recorded portion.
(p. 51)
AUDIO MIX is set to ST1 side in the menu settings.
-) Adjust AUDIO MIX. (p. 84)
TITLE DSPL is set to OFF in the menu settings.
-) Set it to ON. (p. 84)
(continued on the following page)
>
K
o
5"
143