Sony DCR-PC110 Operating Instructions Manual page 83

Labeling a cassette
To erase the label you have made
In step 6 turn tile SEL/PUSH EXEC dial to select
I÷l,
then press tile dial. Tbe last
character is erased.
To change the label you have made
Insert the cassette to change the label, and operate in tbe same way to make a new label.
If you set the write-protect tab of the tape to lock
You cannot label the tape. Slide the write protect tab to release the write protection.
If the tape has too many index signals
You may not be able to label a cassette because tbe memory is fidl. In this case, delete
data yon do not need.
If you have superimposed titles in the cassette
When the label is displayed, np to 4 titles also appear.
When the "-----" indicator has fewer than 10 spaces
The cassette memory is f\dl.
The .... indicates the number of characters you can select fbr the label.
To erase a character
Select I÷1.
The last character is erased.
To enter a space
Select [ Z& ? ! [, then select tbe blank part.
5'
83