Recording A Pirture - Sony DCR-PC110 Operating Instructions Manual

Digital video camera recorder
Hide thumbs Also See for DCR-PC110:
Table of Contents

Advertisement

Recording
a picture
Note on the LOCK switch
When you slide the LOCK switch to the left, the POWER switch
can no longer be set to
MEMORY
accidentally.
LOCK switch
is set to the rigbt as a default
setting.
To enable smooth
transition
Transition
between
the last scene you recorded
and the next scene is smooth
as long as
you do not eject the cassette
even if you turn offyour
camcorder.
However,
check the following:
Do not mix recordings
in the SP mode
and ones in the LP mode on one tape.
When you change the battery
pack, set tile POWER switch to OFF (CHG).
When you use a tape with cassette
memory,
however,
you can make the transition
smooth
even after ejecting tile cassette if you use the END SEARCH function
(p. 23).
If you leave your camcorder in the standby
mode for 5 minutes while the cassette
is inserted
Your cameorder
automatically
ttnns off This is to save battery
power
and to prevent
battery
and tape wear. To restmle
tile standby
mode,
set tile POWER switch to OFF
(CHG), and to CAMERA again.
When you record in the SP and LP modes on one tape or you record some scenes
in the LP mode
Tbe playback
picture
inay be distorted
o1"tile time code may not be written
properly
between
scenes.
Recording date and time
The recording date and time are not displayed while recording. However. they are
recorded automatically onto tile tape. To display the recording date and time, press
DATA CODE on the Remote Commander during playback.
(1) Set tbe POWER
switch
to OFF (CHG).
(2) Close tbe LCD panel.
(:3) Set tbe Holding
Grip back to tbe original
position.
(4) Eject the cassette.
(5) Remove
the battery
pack.
(6) Attach
the battery
terminal
cover.
The LCD panel moves about 90 degrees to the viewfinder side and about 180 degrees to
the lens side.
If you turn the LCD panel over so that it faces tbe other way, the @ indicator appears
on the LCD screen and in the viewfinder (Mirror mode).
16
When
closing
tile LCD
panel,
set it vertically,
and
swing
it into tile
camcorder
body.

Advertisement

Table of Contents
loading

Table of Contents