Installing Handle - Hyundai HDBT521T Original Instructions Manual

3. ASSEMBLY

INSTALLING HANDLE

Install handle in bracket. Position handle in a comfortable operating position and tighten four bolts.
INSTALLING THE CARTER OF PROTECTION
Install the carter of protection on the housing. Screw it with the two provided screws.
INSTALLING NYLON LINE CUTTER HEAD (FOR GRASS TRIMMING)
Align hole of the upper plate with hole in shaft and put a locking tool (such as a wrench).
Remove the locking nut and the lower plate.
Install the line cutter head by turning it counter clockwise until it is tight.
Remove locking tool.
To remove the cutting head, put a locking tool in the hole of the shaft. Then unscrew the cutting
head. This will have to be done tool off and cooled.
8