Engine Starting And Stopping Procedures; Starting Warm Engine - Hyundai HDBT521T Original Instructions Manual

ENGINE STARTING AND
STOPPING PROCEDURES
STARTING COLD ENGINE
Move the stop switch to "START"
position.
1. Give a gentle push on the primer pump
repeatedly (7-10times) until fuel comes
into the primer pump.
2. Cold Starts: Pull lever up to close choke.
3. Pull starter handle until engine flash. fires.
4. Push choke lever inwards (excessive cranking with choke lever will cause
flooding engine making it difficult to start).
5. Pull starter handle until engine starts.
6. Allow engine to warm up for a few minutes before using.

STARTING WARM ENGINE

 If fuel tank was not run dry, pull starter. one to three times and should
start.
DO NOT USE CHOKE
 If fuel tank was run dry, after refilling repeat steps 3 thru 7 in.
STARTING COLD ENGINE.
STOPPING THE ENGINE
 Move switch to STOP position
OPERATIONS
1W