Stopping And Starting - Hyundai HY2188 Instruction Manual

HY2188 Stopping and Starting
The HY2188 starts by pressing both the On/Off Trigger (B) and the Front
Safety Switch (D) at the same time. This in built safety mechanism stops
the machine from starting accidentally.
Upon pressing both the On/Off Trigger (D) and Front Safety Switch (B),
allow the machine to get to full speed before undertaking any
trimming, this could take a second or two.
To stop the machine, release both the On/Trigger (D) and Front Safety
Switch (B). Allow the machines blades to stop before putting it down.
B
The maximum cutting diameter of this machine is 16mm. NEVER
attempt to cut branches thicker than this, as it will cause damage to
the blades and possibly the motor.
Operation
D
www.hyundaipowerproducts.co.uk
16mm
19