National Instruments NI ELVIS III Getting Started page 13

Note
You must use Internet Explorer to complete this step.
■
The IP address of the USB connection appears only after you
■
install the Measurements Live Support
3. Click the Network Configuration button
of the web page to display the Network Configuration page.
4. In the Wireless Adapter wlan0 section, select Connect to wireless
network from the Wireless Mode pull-down menu.
5. Select the country in which you are located from the Country pull-down
menu. You must specify a country before you can select an available channel
for the wireless network.
6. Select the wireless network you want to join or select Other network if
you cannot find the wireless network from the Wireless Network pull-down
menu.
7. Enter security settings for the wireless network that you select. You must
select Infrastructure from the Network Type pull-down menu because the
NI ELVIS III does not support Ad Hoc networks.
8. Select DHCP or Link Local from the Configure IPv4 Address pull-down
menu. This option specifies that the NI ELVIS III automatically acquires an IP
address.
NI ELVIS III Getting Started
Files.
on the left
© National Instruments
13