Table of Contents
Advertisement
LD/CDV/CD
TO SEARCH FOR A PARTICULAR TIME/FRAME
Time Number Search/Track time Search/ABS Time Search/Frame Number Search
Time Number Search - Example: To search for the scene located at time number 12 min. 34 sec (CLV)
1.
Press CHP/TM.
CAUTION
When the display shows chapter No., press this button
e If a disc does not contain information on the digits of
again.
seconds, specify the time number only as far as the
minute digits.
2.
Enter [7], [2], [3] and [4] with the digit buttons.
If you make a mistake during entry:
Press CLEAR to reset the time number to "0.00", and
then press the correct digit buttons.
3.
Press PLAY m.
Track Time Search — To search for a time on a specified track (CD/CDV)
1.
Press CHP/TM.
2.
Press SKIP é<
or »Pi so that the desired track
number appears in the front panel display window.
3.
Enter
the track
time
(elapsed
time
from
the
beginning
of the specified track) with the digit
buttons (0 - 9).
4.
Press PLAY >.
ABS Time Search (CD only) - To search for a point by designating the elapsed time from the beginning of the disc
1
Press CHP/TM
so that "Ab" appears in the front
3
Press PLAY >.
panel display window.
(On the monitor screen,
Playback starts from the specified elapsed time.
"ABS" appears.)
2
Enter the elapsed time from the beginning of the
disc with the digit buttons (0-9).
Frame Number Search (CAV discs only) — To search by designating the frame number
Any desired frame can be searched for by specifying its frame
number.
md
Press CHP/TM. When the display shows chapter No.,
press this button again. "Frame 0" is displayed.
N
Enter the required frame
number
with the digit
buttons (0 - 9).
wo
Press PLAY >.
NOTES:
To exit search mode:
@
The +10 button does not function.
Press CLEAR.
!f you make a mistake during entry, press CLEAR and press the
correct digit buttons.
When PLAY > on the remote control unit is pressed:
A still frame is displayed (LD or video part of CDV). To start normal
playback, press PLAY >.
27
<VRB1083>
Advertisement
Table of Contents
