Table of Contents
Advertisement
SYSTEM REMOTE CONTROL CONNECTION
WHEN
COMBINED
WITH
OPTIONAL
PIONEER
PROJECTION
MONITOR
(or COMPONENT
DISPLAY)
Connect the VIDEO OUT jack of the player to the video
input jack of the projection
monitor
(or component
display), and connect the AUDIO OUT jacks of the player
to the audio input jacks of the projection monitor (or
component display).
System Control
By connecting the CONTROL IN jack of the player to the
remote jack of the projection monitor (or component
display), the system can be controlled by the remote
contro! unit of the player at the remote contro! sensor of
the projection monitor (or component display).
e@ Use a commercially available cord with mini-plugs for
the connection.
Please also refer to the operating instructions for the
projection monitor (or component display).
Video cord
sean
NOTE:
When system control connections have been made, the
player cannot be directly controlled by the remote control
unit.
To operate the player, aim the remote control unit
at the projection monitor (or component display).
Projection monitor
(or component display)
Commercially available
cord with mini-plugs
{without load)
Audio cord
Stereo amplifier
13
<VRB1083>
Advertisement
Table of Contents
