Table of Contents
Advertisement
| NAMES AND FUNCTIONS OF FRONT PANEL COMPONENTS
A detailed description is provided on the indicated page(s).
FL DISPLAY OFF button/indicator
Pressing this button turns off the display in the front panel
display window and causes the DISPLAY OFF indicator
to light. Press the button again to cause the display to
return. Turning off the display prevents low levels of
noise from adversely affecting sound quality.
Remote sensor ... p.15
@ PIONEER
cocov
upriver
CLD-D760
Ian
mG
STANDBY indicator
This indicator lights when the power is set to standby
and goes out when the power is turned on.
POWER STANDBY/ON switch
Press to turn the power on and off.
PHONES jack ... p. 21
PHONES LEVEL control
Turn this control in the "MAX" direction to increase
the output level from the PHONES jack. Turn this
control in the "MIN" direction to decrease the output
level from the PHONES
jack.
LEGATO LINK CONVERSIQN & F
Digital Si
.
PSC (Picture Stop Cancel) button... p.30
Display window
TRACK/CHAP. indicator
Indicates the TRACK number or CHAP (chapter) number.
REP indicator
Lights during repeat play.
Pause indicator (1)
Lights when the player is in pause mode.
PGM indicator
RANDOM indicator
Lights during random play.
FRAME/TIME indicator
Indicates the FRAME number or TIME.
DIGITAL SOUND indicator
Lights during program play.
Play indicator (>)
Lights during play. Blinks during search.
SIDE A indicator
ONE-SHOT MEMORY indicator
Blinks when
ONE-SHOT
MEMORY
is
Lights when the disc being played has
a digital sound signal.
With LD discs, this indicator lights when
the digital sound signal is selected.
INTRO indicator
Lights during Hilite scan or|ntro
Scan mode.
Lights during One-Shot Memory playback.
BI Ef)
©) ba Seay'
Pict)
_p
a
LD side A/CD/CDV visual calendar
When a disc is loaded, all of the chapter/
track numbers recorded on the disc light up
on the display. If the disc contains more than
19 chapters/tracks, the — indicator lights.
During program play, only the programmed
chapter/track numbers
light. When
a disc
without
a TOC section is played, only the
selection number being played lights.
When
a CDV
disc is loaded,
the track
numbers of the video part light followed by
the track numbers of the audio part.
After a chapter/track is finished playing, the
corresponding number goes out.
16
<VRB 1083>
LD/CD/CDV indicator
Indicates the type of disc loaded
in the player.
LD side B visual calendar
A visual calendar for the B
side
of two-sided
LDs.
Numbers light in the same
way as on the side A visual
calendar.
1/L, 2/R indicator
Indicates the audio output
channel.
DIGITAL MEMORY
indicator
Lights when digital
memory is ON.
EDIT indicator
Lights when editing is performed.
REMAIN/TOTAL indicator
Indicates the REMAIN
TIME
(remaining play time) or TOTAL
TIME (total play time).
Advertisement
Table of Contents
