Table of Contents
Advertisement
CONVENIENT FUNCTIONS FOR PLAYING AN LD, CDV OR CD
<@<@ BP
Scan (Manual Search) - Search using fast forward or fast reverse
SCAN
Press for fast-reverse =]
= Cf}
Press for fast-forward
operation
operation
Normally Clear Scan is performed. To perform Low Scan
and High Scan, press DISP on the remote control unit to
display the screen and then press SCAN button. For about
two seconds
after the button is pressed,
Low Scan is
performed, after that, the unit enters High Scan.
Clear Scan mode: The image may not fluctuate in this
mode.
Low Scan mode: Scan speed becomes about 10x the
normal playback speed.
High Scan mode: Scan speed becomes about 30x the
normal playback speed.
With CDs or audio part of CDVs, Clear Scan mode
cannot be carried out.
With video part of CDV, High Scan mode cannot be
carried out.
in Clear Scan mode, when digital sound is selected with
digital audio discs, sound is heard at low volume level.
in karaoke mode, sound is muted.
With CDs or audio part of CDVs, sound is heard at low
volume while scanning.
Others: Sound is muted.
LD/CDV/CD
TO SEARCH FOR A PARTICULAR TIME/FRAME
Frame Number Search/Time Number Search/Track time Search/ABS Time Search
SEARCHING OF LD DISC
SEARCHING OF CD DISC
Frame Number Search (CAV discs only)
:
~ To search by designating the frame number
Track Time Search (CD/CDV discs only) - To
search for a time on a specified track
Any desired frame can be searched for by specifying its frame
1. Press CHP/TIME.
number.
2.
Press << or >>| so that the desired track number
1. Press CHP/TIME during playback.
appears in the front panel display window.
When the display shows chapter NO., press this button
again. "Frame
0" is displayed.
3. Enter the track time
(elapsed
time from
the
beginning
of the specified track) with the digit
2. Entertherequired
frame number with the digit buttons
buttons (0 - 9).
{0 - 9).
4. Press >/ii or PLAY b>.
3. Press >/ttor PLAY m.
Time Number Search (CLV disc only)
ABS Time Search (CD discs only) ~ To search
~ Example: To search for the scene located at 12
for a point by designating the elapsed time from
min. 34 sec
the beginning of the disc
1.
Press CHP/TIME during playback.
1.
Press CHP/TIME, so that "Ab" appears in the front
When the display shows chapter No., press this button
panel display window.
(On the monitor
screen,
again.
"BBS" appears.)
2.
Enter [1], [2], [3] and (4! with the digit buttons.
2.
Enter the elapsed time from the beginning of the
disc with the digit buttons (0 - 9).
3.
Press p/tior PLAY >.
3.
Press >/H or PLAY
».
Playback starts from the
CAUTION:
specified elapsed time.
lf a disc does not contain information in seconds, specify the
time number only in the minutes.
When
PLAY & on the remote control unit is pressed to start
search operation:
Astill frame is displayed (CAV). To start normal playback, press PLAY
& again.
Notes on searching for a chapter/track:
if you make a mistake in pressing the digit buttons, press CLEAR
and press the correct digit buttons.
The +10 button does not function.
To exit search mode:
19
Press CLEAR. Normai playback starts.
<VRB1118>
En
Advertisement
Table of Contents
