To Search For A Particular Time/Frame - Pioneer LaserDisc CLD-D704 Operating Instructions Manual

1
1.
20
LL,II L;DV/L;IJ
TO SEARCH FOR A PARTICULAR TIME/FRAME
Time Number Search/Track time Search/ABS Time Search/Frame Number Search
Time Number Search - Example: To search for the scene located at time number 12 min. 34 sec (CLV) 1
Press CHP/TM during playback.
When the display shows chapter No., press this button
again.
CAUTION:
If a disc does not contain information on the digits of seconds,
specify the time number only as far as the minute digits.
Enter [], _], [] and [] with the digit buttons.
If you make a mistake during entry:
Press CLEAR to reset the time number to "0.00", and then
press the correct digit buttons.
3. Press PLAY_-.
I
1.
2.
3,
4.
I
1.
2o
Track Time Search - To search for a time on a specified track (CD/CDV)
Press CHP/TM.
Press SKIP _ or _ so that the desired track
number appears in the front panel display window.
Enter the track time (elapsed time from the
beginning of the specified track) with the digit
buttons (0 - 9).
Press PLAY I_.
ABS Time Search (CD only) - To search for a point by designating the elapsed time from the beginning of the disc
Press CHP/TM, so that "Ab" appears in the front
panel display window. (On the monitor screen,
"ABS" appears.)
3. Press PLAY _,-.
Playback starts from the specified elapsed time.
Enter the elapsed time from the beginning of the
disc with the digit buttons (0 - 9).
I Frame Number Search (CAV discs only) - To search by designating the frame number
Any desired frame can be searched for by specifying its frame
number.
1. Press CHP/TM during playback. When the display
shows chapter No., press this button again. "Frame
0" is displayed.
2. Enter the required frame numberwith thedigit buttons
(0 - 9).
3. Press PLAY _.
NOTES:
• The + 10 button does not function.
• If you make a mistake during entry, press CLEAR and press the
correct digit buttons.
28
<VRB1142>
To exit search mode:
Press CLEAB.
When PLAY I,- on the remote control unit is pressed:
A still frame is displayed (LD or video part of CDV). To start no_n _al
playback, press PLAY _.