Table of Contents
Advertisement
LD/CDV/CD
TO SEARCH FOR A PARTICULAR TIME/FRAME
Time Number Search/Track time Search/ABS Time Search/Frame Number Search
Time Number Search - Example: To search for the scene located at time number 12 min. 34 sec (CLV)
1.
Press CHP/TM.
When the display shows chapter No., press this button
again.
2. Enter [1], [2], [3] and [4] with the digit buttons.
If you make a mistake during entery:
Press CLEAR to reset the time number to "0.00", and
press the correct digit buttons again.
3.
Press PLAY/PAUSE m/1t or PLAY >.
CAUTION
Ifa disc does not contain information on the digits of seconds,
specify the time number only as far as the minute digits.
Track Time Search - To search for a time on a specified track (CD/CDV)
1. Press CHP/TM.
2,
Press SKIP <4
or mi
so that the desired track
number appears in the front panel display window.
3.
Enter
the track time
(elapsed
time from the
beginning
of the specified track) with the digit
buttons (0 - 9).
4.
Press PLAY/PAUSE »/t or PLAY &.
1. Press CHP/TM
so that "Ab" appears in the front
panel display window.
(On the monitor screen,
"ABS" appears.)
2.
Enter the elapsed time from the beginning of the
disc with the digit buttons (0-9).
Any desired frame can be searched for by specifying its
frame number.
1.
Press CHP/TM. When the display shows chapter NO.,
press this button again. "Frame
0" is displayed.
2.
Entertherequired frame number with the digit buttons
{0 - 9}.
3. Press PLAY/PAUSE m/it or PLAY ». The designated
frame is played as a still frame.
NOTES:
@
/fyou make a mistake in pressing the digit buttons, press CLEAR
and press the correct digit buttons.
@
The +10 button does not function.
18
<VRB1059>
To exit search mode:
Press CLEAR,
Advertisement
Table of Contents
