Table of Contents
Advertisement
CD/CDV (Audio part)
PARTICULAR FUNCTIONS FOR CD - Direct cb
Since the picture circuit is deactivated and the interference
between signals is eliminated with the Direct CD function,
more pure sound can be reproduced.
e When the Direct CD function is activated, the player does
not display information on the monitor screen.
e@ 'n Direct CD mode, time for starting play becomes short
compared with that of normal play operation.
1 Press DIRECT CD on the front panel.
DIRECT CD
ye
2 Open the disc table.
OPEN
/CLOSE
=
EJECT
ae
Oe
™
va
e The disc table comes out according to the CD size.
3 Load aCD on the disc table.
4 Start play.
PLAY
/STILL
—
PLAY
Va,
SE
To exit Direct CD mode:
Press DIRECT CD again.
To play an LD:
Cancel the Direct CD mode. Otherwise, the LD cannot be set
on the disc table.
NOTE:
During LD play, the player does not enter Direct CD mode
even if DIRECT CD is pressed.
During CDV play, the player automatically turns on and off the
picture circuit according to the video part or audio part in the
Direct CD mode.
On screen display:
The information is displayed on the blue screen by pressing
DISPLAY onthe remote control unit. Also, when programming
or editing, the information is displayed.
By turning off the screen display or canceling the input mode,
the player automatically turns off the picture circuit, and the
screen turns to black.
29
<VRB1083>
Advertisement
Table of Contents
