Run Test Panels
1.
In MAX, expand Devices and Interfaces select the chassis in which the module is located.
2.
Right-click the device, and select Test Panels.
3.
Click Start to test device functions, or Help for operating instructions.
To troubleshoot errors, refer to the NI-DAQmx Help, or go to
Take an NI-DAQmx Measurement
NI-DAQmx Channels and Tasks
Refer to the NI-DAQmx Help for complete information about channels and tasks.
Use the DAQ Assistant to configure virtual channels and tasks in MAX or in your application.
Configure a Task Using the DAQ Assistant in MAX
Complete the following steps to create a task using the DAQ Assistant in MAX:
1.
In MAX, right-click Data Neighborhood and select Create New to open the DAQ
Assistant.
2.
Select NI-DAQmx Task and click Next.
3.
Select Acquire Signals.
4.
Select the measurement type, such as Analog Input - Position - LVDT.
NI PXIe-4340 and TB-4340 User Guide and Terminal Block Specifications | © National Instruments | 11
ni.com/support
.