Table of Contents
Advertisement
Caution
external signals while the device is powered off may cause damage.
1.
Disconnect any signals from the module front panels.
2.
Power off the chassis.
3.
Remove the module from the chassis and inspect it for damage. Do not reinstall a
damaged device.
4.
Reinstall the module in a different chassis slot.
5.
Power on the chassis.
6.
Verify that the device appears in MAX.
7.
Reset the device in MAX and perform a self-test.
What Should I Do if the NI 5694 Doesn't Appear in
MAX?
1.
In the MAX configuration tree, click Devices and Interfaces.
2.
Expand the Chassis tree to see the list of installed devices, and press <F5> to refresh the
list.
3.
If the module is still not listed, power off the system, ensure that all hardware is correctly
installed, and restart the system.
4.
Navigate to the Device Manager.
Operating System Description
Windows 8
Windows 7
Windows Vista
Windows XP
5.
If you are using a PXI controller, verify that a National Instruments entry appears in the
system device list. Reinstall NI-RFSA and the device if error conditions appear in the list.
If you are using an MXI controller, right-click PCI-to-PCI Bridge, and select Properties
from the shortcut menu to verify that the bridge is enabled.
What Should I Do if the Module Fails the Self-Test?
1.
Restart the system.
2.
Launch MAX, and perform the self-test again.
3.
Power off the chassis.
4.
Reinstall the failed module in a different slot.
5.
Power on the chassis.
6.
Perform the self-test again.
10 | ni.com | NI PXIe-5694 Getting Started Guide
Apply external signals only while the NI 5694 is powered on. Applying
Right-click the Start screen, and select All apps»Control Panel»
Hardware and Sound»Device Manager.
Select Start»Control Panel»Device Manager.
Select Start»Control Panel»System and Maintenance»Device
Manager.
Select Start»Control Panel»System»Hardware»Device
Manager.
Advertisement
Table of Contents
