Compatibility
Dimensions (without mounting brackets)
DC connector type
Weight
IP Rating
Torque specifications for fasteners
(Do not over-torque)
Cooling
Relative humidity range
Approved for wet locations
Altitude
Pollution degree
Standard warranty terms
Compliance
Earthing
Monitoring
Communication
6.
A minimum of two IQ8 Series Microinverters shall be required in the system.
33
IQ8MC, IQ8AC, and IQ8HC Installation and Operation Manual
IQ8HC-72-M-ACM-INT Microinverter parameters
Features and specifications
IQ8HC-72-M-ACM-INT Microinverter parameters
© 2023 Enphase Energy Inc. All rights reserved.
54-cell/108-half-cell, 60-cell/120-half-cell, 66-
cell/132-half-cell, 72-cell/144-half-cell
212 mm (8.3") x 175 mm (6.9") x 30.2 mm (1.2")
Stäubli MC4
1.1 kg
Outdoor - IP67
•
6 mm mounting hardware: 5 N m
•
8 mm mounting hardware: 9 N m
Natural convection - No fans
4% to 100% (condensing)
Yes
<2600 m
PD3
http://enphase.com/warranty
With IQ Relay:
AS/NZS 4777-2:2020
6
Safety:
EN IEC 62109-1, EN IEC 62109-2
EMC:
EN IEC 61000-3-2, 61000-3-3, 61000-6-2, 61000-6-
3, EN IEC 50065-1, 50065-2-1
EN55011 (At STC within MPP range)
The DC circuit meets the requirements for ungrounded
PV arrays. Ground fault protection (GFP) is integrated
into the Class II double-insulated microinverter.
Enphase Installer Portal and Enphase App monitoring
options. Both options require an IQ Gateway
Power line communication (PLC)
November 2023
USM-00006-2.0