Step 4: Prepare The Ac Module - enphase IQ8MC Installation And Operation Manual

Step 4: Prepare the AC Module

A. Before installing the AC Module, the microinverters must be lifted from the shipping position. On the
ground, turn the AC Module so that the microinverter faces you. Using both hands, lift the
microinverter. You will hear four clicks as the microinverter locks into the installation position. Ensure
the four latches are locked, and the microinverter is not tilted.
NOTE: If you need to move the module, you can return the microinverter to the shipping position using
an IQ Disconnect Tool. Use the tool to depress the four locking mechanisms on each corner of the
microinverter to return it to the shipping position.
B. Position the AC Modules as planned on the rail.
17
IQ8MC, IQ8AC, and IQ8HC Installation and Operation Manual
© 2023 Enphase Energy Inc. All rights reserved. November 2023
USM-00006-2.0