Managing System
Update Rate: 11 hour(s)
Switch(config)#end
Switch#copy running-config startup-config
2.2.4 Configuring the Daylight Saving Time
Follow these steps to configure the Daylight Saving Time:
Step 1
configure
Enter global configuration mode.
Step 2
Use the following command to select a predefined Daylight Saving Time configuration:
system-time dst predefined [ USA | Australia | Europe | New-Zealand ]
Specify the Daylight Saving Time using a predefined schedule.
USA | Australia | Europe | New-Zealand:
USA: 02:00 a.m. on the Second Sunday in March ~ 02:00 a.m. on the First Sunday in November.
Australia: 02:00 a.m. on the First Sunday in October ~ 03:00 a.m. on the First Sunday in April.
Europe: 01:00 a.m. on the Last Sunday in March ~ 01:00 a.m. on the Last Sunday in October.
New Zealand: 02:00 a.m. on the Last Sunday in September ~ 03:00 a.m. on the First Sunday in
April.
Use the following command to set the Daylight Saving Time in recurring mode:
system-time dst recurring { sweek } { sday } { smonth } { stime } { eweek } { eday } { emonth } {
etime } [ offset ]
Specify the Daylight Saving Time in Recuring mode.
sweek
first, second, third, fourth, last.
sday
Mon, Tue, Wed, Thu, Fri, Sat.
smonth
Jan, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, Oct, Nov, Dec.
stime
eweek
first, second, third, fourth, last.
eday
Mon, Tue, Wed, Thu, Fri, Sat.
emonth
Jan, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, Oct, Nov, Dec.
etime
offset
: Enter the start week of Daylight Saving Time. There are 5 values showing as follows:
: Enter the start day of Daylight Saving Time. There are 7 values showing as follows: Sun,
: Enter the start month of Daylight Saving Time. There are 12 values showing as follows:
: Enter the start time of Daylight Saving Time,in the format of HH:MM.
: Enter the end week of Daylight Saving Time. There are 5 values showing as follows:
: Enter the end day of Daylight Saving Time. There are 7 values showing as follows: Sun,
: Enter the end month of Daylight Saving Time. There are 12 values showing as follows:
: Enter the end time of Daylight Saving Time,in the format of HH:MM.
: Enter the offset of Daylight Saving Time. The default value is 60.
Select one mode of Daylight Saving Time.
System Info Configurations
Configuration Guide
38